RIGOL DM3068 - Manual (Page 58)

RIGOL
DM3068 Quick Guide 14
2. Select a proper current input terminal according to the estimated current
magnitude before connect the multimeter to AC supplies if you want to use
current measurement.
3. Only use 10 A and LO terminals for measurements when the measured current
AC+DC RMS value goes within 200 mA and 10 A.
Resistance Measurement (2-wire) Resistance Measurement (4-wire)
Capacitance Measurement
Continuity Measurement Diode Measurement
+
2WR
-
+
4WR
-
+
Capacitance
-
+
Open or
Closed Circuit
-
+
Open or
Closed Circuit
-