Emerson Radio RET66BK - Manual (Page 17)

16
4.) Repeat step 3, selecting a different track number each time until you have
entered up to 20 tracks in the program memory.
5.) When you have completed programming the desired
tracks press the PLAY/PAUSE button to begin
programmed playback. The PROG indicator stops
flashing and remains ‘On’. Playback will begin on the
first track you programmed and will continue until the
last programmed track has played.
6.) When the program is completed the player stops and the display again shows
the correct time. However the PROG indicator remains ‘On’ and the player
remains in the Programmed Playback mode. If you press the PLAY/PAUSE
button the programmed sequence will play again.
To cancel the Programmed Playback mode press the STOP button while in
programming mode. The PROG indicator goes ‘Off’.
Programmed Playback may also be canceled by opening the CD door.
Programmed Repeat Playback
You may use the Programmed Playback and Repeat features together to
continuously repeat a programmed sequence.
First program the desired sequence according to steps 1 through 4 above.
When Programmed Playback begins press the REPEAT
button twice to select the Repeat All Tracks mode. The REP
indicator and the PROG indicator remains ‘On’. The
programmed sequence will be repeated continuously.
RET66_080504.p65 5/8/2004, 16:05 16