Rose Electronics MultiVideo - Manual (Page 41)

KEYBOARD COMMANDS
ULTRAVIEW PRO INSTALLATION AND OPERATIONS MANUAL
27
Keyboard commands
The following table describes the available keyboard commands. The
<Ctrl> key sequence is a press and release of the left control key.
Commands following <Ctrl> must be entered within 2 seconds.
Command Key sequence Description
OSD menu <Ctrl> F12 Displays on-screen menus
CPU select <Ctrl> ESC List of CPUs to select
Select
computer <Ctrl> nnn where nnn
= computer number Connects the KVM station to
the selected computer.
Next computer <Ctrl> + Selects next sequential CPU
Previous
computer <Ctrl> - Selects previous sequential
CPU.
Scan ON <Ctrl> S Turns scan mode on
Scan OFF <Ctrl> X Turns scan mode off
Display label <Ctrl> D Turns CPU label on/off
Logoff <Ctlr> L Disconnects from currently
connected computer.
Set mode <Ctrl> Mnn <Enter>
where nn = mode
value from Table 5. Alternate way to configure
keyboard and mouse.
Set resolution <Ctrl> Yn <Enter>
where n = resolution
value from Table 6 Alternate way to set screen
resolution when no video is
present from a CPU..
Screen saver
time <Ctrl> Vnnn <Enter>
where n = 0 –999 sec. Alternate way to set screen
saver time.
Null mouse
command <Ctrl> N Used to re-sync a PS/2
mouse.
Reset mouse <Ctrl> O (alpha O) Resets computer’s mouse.
Reset
command <Ctrl> R Resets and enables mouse
and keyboard on currently
selected computer
Max computers <Ctrl> Pnnn Total ports used (all units)
Units <Ctrl> Unn Number of expansion units.
Width <Ctrl> Wnn Number of ports on
expansion units.
Keep <Ctrl> K Saves to flash memory.
Table 6. Keyboard commands