Rose Electronics UltraVista SX - Manual (Page 7)

OVERVIEW
INSTALLATION and OPERATIONS MANUAL 3
System Overview
The UltraVista SX is a versatile and dynamic video wall system that can be
easily and quickly set up in almost any location. The UltraVista SX can take
any DVI-D source (video or image) and display it on a 2x2 video array.
Each display monitor shows ¼ of the original video source using real-time
scaling while maintaining the original resolution on all monitors. Resolutions
from 800 x 600 to 1920 x 1200 are fully supported for both analog and DVI
LCD displays.
UltraVista SX can “learn” the DDC information you wish to use. Using the
front display panel and selector buttons, you can choose to “learn” the
specifications from a PC, a Mac, or the screen. Once the unit has learned
the monitor specifications, it will emulate the monitors even if no monitors
are connected. This allows you to make changes or set-up a new
presentation without displaying your work on the video wall.
UltraVista SX MODEL
Front View
2x20 LCD Display Screen
Scroll – Push button
Enter – Push button
Rear View Connectors
DVI-I Male
(1-DVI in / 4-DVI out)
RS232 – Serial Control
Power – +5VDC-3A