Eton Sound 102 - Manual (Page 12)

10
AUTOMATIC CLOCK SETTING
When power to the set has been interrupted, the clock will be lost.
When the automatic mode is on, the set will tune to a DAB signal
when the power is restored, and will attempt to automatically update
the clock. If the set has been set to CLOCK SETTING ON or there is
no available DAB signal with clock information, you will need to set
the clock manually, as described above.
The alarm can be set to wake you by beeping tones (BUZZER mode),
or with music or speech from DAB radio, FM radio, or your iPOD. The
volume of the alarm will start quietly and gradually increase. In iPOD
mode, play will start from the last track played.
Note: if the set is in AUX mode, only BUZZER operation is possible.
SETTING AND ACTIVATING THE ALARM TIME
AND WAKE-UP MODE
To set the alarm, the radio can be in standby mode, or turned on, in
DAB, FM or iPOD mode.
Use the buttons on the radio or the remote. Watch the display.
1. Press and hold the ALARM button for about 2 seconds, then
release it – ON or OFF flash on the left side of the display.
2. Press the tune buttons to toggle the alarm ON and OFF.
3. Press/release the ENTER/ button – the hour flashes.
4. Press the TUNE buttons to adjust the hour.
SETTING THE CLOCK continued
ALARM FUNCTIONS
SOUND 102 OWNER’S MANUAL