Rosen Aviation 1702 Series : 17.5 inch WideScreen High definition - Manual (Page 22)

Rosen Aviation 17.5” HD Widescreen Display
Document Number: 102990 Revision: C
Date: 03/17/14
Template: 4.2.3-6-FM; Revision A; 16 May, 2005 Page 22 of 34
8.1. Advanced Technician Menu
This submenu provides installers and technicians more advanced controls of the image.
Figure 28 Technician Advanced Menu
8.1.1. Factory Reset
Choose this option to perform a complete factory restore. It is similar to Reset Scheme in
the Main MenuAdvanced submenu; however, Factory Reset returns all items with pre-
determined defaults in both the User and Technician menus to their factory settings.
Highlight AdvancedFactory Reset and press ENTER.
A Reset Complete message appears after the display restores the default settings.
8.1.2. Viewing Angle
Use Viewing Angle to adjust the settings for viewing angles from different seat positions.
Changes to the Viewing Angle adjustment will affect other UserImage Adjust settings.
Highlight AdvancedViewing Angle and press ENTER.
Press the ◄ or ► to adjust the viewing angle in 5-degree increments from
-20 to +20 degrees.
Press ENTER to set the viewing angle and close the control bar.
Select Back to return to the Technician Menu.
Press EXIT to exit the OSD.
Figure 29 Viewing Angle control bar
NA indicates that a
Composite signal is not
available