Rosen Aviation 0602 Series : Single-Disc Blu-ray Player with SDI - Manual (Page 26)

Rosen Aviation Blu-ray DVD Player with SDI
Document Number: 105880 Revision: B
Date: 09/19/13
Template: 4.4.1.6FM2; Revision A; 12/06/12 Page 26 of 33
7.1.6. Speaker (7.1 Multi-channel analog audio only)
Use the Speaker options to connect and configure cabin speakers to the Blu-ray DVD
player. Select SettingsSpeaker and then press ENTER to open a menu with the
following options, as shown below.
Figure 20 Speaker options for analog audio
Use the arrow buttons and then press ENTER to select the different Speaker options
from individual popup windows.
Option How it Works
Front L Select the size of the front speakers: Large or Small. When either front
speaker is set, the OSD will automatically set the other front speaker to
the same value.
 Off: Turns off the left front speaker.
Center Enable and select the size of the center speaker: Large or Small. Large
is only available when Front L and Front R set to Large.
 Off: Turns off the center speaker.
Front R Select the size of the front speakers: Large or Small. When either front
speaker is set, the OSD will automatically set the other front speaker to
the same value.
 Off: Turns off the right front speaker.
Surround L Enable and select the size of the surround sound speakers: Large or
Small. Large is only available when Front L and Front R are set to
Large. When either surround speaker is set, the OSD will automatically
set the other surround speaker to the same value.
 Off: Turns off the left surround speaker.
Rear L Select the size of the rear speakers: Large or Small. When either rear
speaker is set, the OSD will automatically set the other rear speaker to
the same value.
 Off: Turns off the left rear speaker.