Led indicators – SAF OPAL Pro DeviceNet User Manual
Page 7
Opal Pro to DeviceNet
Page 7
LED Indicators
Two bi-colour (red/green) LED indicators are mounted beside the network
connector. The upper LED (the one mounted furthest away from the
DeviceNet interface PCB) indicates the DeviceNet interface card status.
LED State
DeviceNet Interface Card Status
OFF
No power
Flashing Red
Recoverable configuration fault (card is not
configured, contact SAF Drives for support)
Solid Red
Hardware Error (contact SAF Drives for support)
Flashing Green
No errors client interface is not open ( check software
firmware version of Opal Pro)
Solid Green
No errors client interface is open (normal operation)
Amber
(Red/Green)
Configuration Mode (card is not configured, contact
SAF Drives for support)
The lower LED indicator (the one mounted closest to the DeviceNet
interface PCB) indicates the DeviceNet Network status.
LED State
DeviceNet Network Status
OFF
Network interface offline, No network power
Flashing Red
I/O connection in timed-out state or other
Recoverable fault
Flashing Green
Device in online but has no connections
Solid Red
Unrecoverable fault
Solid Green
Online with established connections
Amber
(Red/Green)
Device is in Communication Faulted state and
responding to an Identify Communication Faulted
Request