Emerson Radio MS7630 - Manual (Page 6)

5
SPEAKER CONNECTION
Connect each speaker to the corresponding speaker terminals on the back panel
of the main unit. Make sure that the left speaker is connected to the (L) left pair of
speaker terminals and the right speaker to the (R) right pair of speaker terminals.
Also make sure that the speaker wires are correctly connected: that the red wires
are connected to the red terminals and the black wires to the black terminals.
Depress the plastic lever to open the terminal, insert the bare end of the speaker
wire into the opening and release.
Power
ON
Power
OFF
B
L
A
C
K
R
E
D
R
E
D
R+
R-
L+
L-
Red Wire
Black Wire
PROTECT YOUR FURNITURE
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
MS7630_011504.p65 15/1/2004, 10:06 5