EZQuest DVD Duplication - Manual (Page 41)

5.12.4 Format HDD
On the above figure press ESC and t
to enter the following figure. Format HDD is
to partition the hard disk. But before formatting, all data on the hard disk will be
deleted.
12-04. Adv Setup
Format HDD
Press ENT to enter the next figure. Use s t
to confirm Yes or No.
All data will be
lost, format? Yes
If your copy smart plus doesnít connect with a hard disk, LCD will show the message
as follows.
There is no HDD!
5.12.5 Verify HDD
On the above figure press ESC to return to Function 12, and then select part 5 Verify
HDD as the following figure shows. Verify HDD is to verify if the hard disk or any
of its partitions can work well.
12-05. Adv Setup
Verify HDD
Page 41