Elo TouchSystems ENTUITIVE TOUCHMONITOR ET1545C - Manual (Page 33)

Elo Entuitive Touchmonitor CRT Rear Mount User Guide - 27
Appendix B
Touchmonitor Safety
This manual contains information that is important for the proper setup
and maintenance of your touchmonitor. Before setting up and powering
on your new touchmonitor, read through this manual, especially Chapter
2, Installation and Setup, and Chapter 3, Operation.
1. To reduce the risk of electric shock, follow all safety notices and
never open the touchmonitor case.
2. Your new touchmonitor is equipped with a three-wire, ground-
ing power cord. The power cord plug will only fit into a three-
pronged safety ground outlet. Do not attempt to fit the plug into
an outlet that has not been configured for this purpose. Do not
use a damaged power cord. Use only the power cord that comes
with your Elo TouchSystems touchmonitor. Use of an unautho-
rized power cord may invalidate your warranty.
3. The slots located on the sides and top of the touchmonitor case
are for ventilation. Do not block or insert anything to the ventila-
tion slots.
4. It is important that your touchmonitor remains dry. Do not pour
liquid into or onto your touchmonitor. If your touchmonitor
becomes wet do not attempt to repair it yourself.