Elo TouchSystems ENTUITIVE TOUCHMONITOR ET1545C - Manual (Page 12)

Chapter 2 : Installation and Setup
6 - Elo Entuitive Touchmonitor CRT Rear Mount User Guide
Vertical Mount
To mount the brackets vertically to your touchmonitor:
1. Locate the two holes on each side of your touchmonitor. Match
up the two holes of one bracket to the holes on one side of your
touchmonitor.
2. Place two screws in the holes and with the screwdriver, screw
them in to secure the bracket.
3. Repeat steps 1 and 2 to attach the other L-bracket to the other
side of the touchmonitor.
Bottom Mount
You can also mount your touchmonitor by using the keyholes on the
bottom of the monitor. These keyholes provide easy slide on mounting.
You can also bolt your touchmonitor to a tabletop or other flat surface.
Please refer to Appendix C for location and dimension of the mounting
holes.
L-bracket