Epson BrightLink 450Wi - Manual (Page 94)

94 Using the Projector on a Network
Configuring the Projector
1. Press the Menu button, then choose Network and press Enter .
2. Choose Network Configuration and press Enter .
3. Choose Wireless LAN and press Enter . You see this screen:
4. Make sure Wireless LAN Power is set to On . You can turn it off
to prevent unauthorized access.
5. Select one of the following connection modes:
■ Quick mode lets you easily connect one computer to the
projector at a time. You can also select this setting when
you’re using the optional Epson Quick Wireless Connection
USB key.
■ Advanced mode lets multiple computers access the projector
at the same time and easily trade off control of the projector.
This method requires a wireless network access point or an
AirPort Extreme (or AirPort) base station.
6. If your network is using 802.11a, use the arrow buttons on the
remote control to highlight 802.11a , then press Enter to select it.
Press Esc to return to the previous menu.