Epson WorkForce RP-310 - Manual (Page 12)

Page - 11-
Emulation
FUNCTIONS SW-4 SW-5
Epson (TM-88) OFF OFF
Paper low detect (? 1)
SW FUNCTIONS ON OFF
6 Paper Low Detect Do not Detect
(? 1) The detecting function of [Paper Low] is an option.
Please set Dip Switch (2-6) [OFF] if you don ’t need any option.
If Dip Switch is [ON] without any special option purpose. Printer detects
[Paper is Low] and it could cause error.
?
CAUTION:
Turn off the printer while removing the DIP switch cover to prevent an electric short, which
can damage the printer.
1. Make sure the printer is turned off.
2. Remove the screw from the DIP switch cover. Then, take off the DIP switch cover as
shown in the illustration below.
3. Set the switches using a pointed toll, such as tweezers or a small screwdriver.
4. Replace the DIP switch cover. Then, secure it with the screw.