Eaton Electrical PXES4P Series User Manual
Page 43
Advertising
PXES4P Switches
Installation and User Guide (10/06)
42
LK/ ACT Steady ON for LINK w/no traffic, blinking for activity per port. LINK will turn
off in the event connectivity is lost between the ends of the twisted pair segment
or a loss of power occurs in the unit or remote device. The Link ports are also
represented by LA1, LA2, LA3, & LA4. (Steady On or steady Off indicates no
Receive Activity).
10/100 Steady ON for 100Mb speed, OFF for 10Mb speed per port
F/H
Steady ON for Full duplex mode, OFF for half duplex per port
Advertising