Electrolux EDI 96150 W - Manual (Page 37)

installation safety instructions electrolux 37
Installation safety instruc-
tions
• Important The appliance must only
be transported in an upright position.
• Before first starting up, all parts of
the transport safety equipment must
be removed. The machine may oth-
erwise be damaged.
• The appliance must not be installed.
• Before starting up for the first time,
ensure that the nominal voltage and
type of current specified on the ma-
chine type plate match the nominal
voltage and type of current at the in-
stallation site. The electrical fuses re-
quired can also be found on the type
plate.
• Always connect the plug into a pro-
tection contact socket which has
been installed as specified.
The manufacturer accepts no re-
sponsibility for damage or injuries
caused by a failure to observe the
safety measures described above.
• With permanent connections: A per-
manent connection may only be es-
tablished by an authorised specialist
electrician.
• Do not install machine in rooms at
risk of frost.
• Do not position the appliance behind
– a door that can be locked,
– a sliding door
– a door with a hinge situated oppo-
site the appliance’s hinge.
• The appliance door must not be at
risk of being blocked by house doors
or the doors of other appliances.
• Do not install on carpets with high
piles. Air circulation will be hindered
at the ventilation slots.
• Ensure that the machine is not
placed on its mains cable.
• Install the machine horizontally.