Elo TouchSystems AMM170TK - Manual (Page 13)

AMM170TK/AMM17TK/AMM18TK/AMM19TK/AMM19TK(HB) 13
POWER MANAGEMENT FUNCTION
The monitor is equipped with the power management function which automatically reduce the
power consumption when not in use in three power level modes.
•
Stand-by Mode
The monitor goes into stand-by mode when the horizontal sync signal is off for about 10
seconds. In this mode, the screen goes off and the power LED blinks for 3 seconds On
and 1 second Off. The screen is displayed after the horizontal sync signal is restored.
• Suspend Mode
The monitor goes into suspend mode when the vertical sync signal is off for about 10
seconds. The power consumption during this is less than 8 W. In this mode, the screen
goes off and the power LED blinks for 3 seconds On and 1 second Off. The screen is
displayed after the vertical sync signal is restored.
• Off Mode
The monitor goes into power-off mode when the vertical and horizontal sync signals are
off for about 10 seconds. In this mode, the screen goes off and the power LED blinks for
3 seconds On and 1 second Off. The screen is displayed after the vertical and horizontal
sync signals are restored.
Power Management System
The AMM17TK, AMM18TK, AMM19TK and AMM19TK/HB Medical Monitor complies
with the VESA DPMS power management proposal. The VESA DPMS proposal provides
four phases of power-saving modes by detecting the horizontal sync signal as shown in the
table blow.
When the monitor is power saving mode or detects an incorrect timing, the screen will be
blank and power LED indicator will blink.
M o d e D C In p u t P o we r
(m o n ito r o n ly )
A C In p u t p o we r
(In c l. A C a d a p te r)
L E D S ta tu s
O n 3 5 W m a x. 6 0 W m a x. S te a d y G re e n
S ta nd b y 4 .5 W m a x. 6 W m a x. B link ing G re e n
S up e nd 4 .5 W m a x. 6 W m a x. B link ing G re e n
O n 4 .5 W m a x. 6 W m a x. B link ing G re e n