Encore electronic ENUWI-NX2 - Manual (Page 9)

IDENTIFYING EXTERNAL COMPONENTS
LED
When the LED is blinking, the WLAN Adapter is transmitting or receiving data on
the Wireless Ethernet network.
Check the installation
The LED of the ENUWI-NX2 Wireless 802.11n USB Adapter is clearly visible and
the status of the network link can be seen instantly:
1. When connected to the USB port and the driver were installed, the LINK LED
will start blinking, and it means that the device is starting to scan a wireless
device near the ENUWI-NX2 Wireless 802.11n USB Adapter.
2. While the ENUWI-NX2 Wireless 802.11n USB Adapter linked up to the Access
Point or to other Wireless LAN station, the LINK LED will always light up.
3