Epson 3010E - Manual (Page 57)

Using WirelessHD
57
Setting Up a WirelessHD Connection
To prepare your device to work with the WirelessHD button, follow these steps:
1. Follow the instructions on the previous page and place the transmitter within range of the
projector.
2. Plug the AC adapter into the transmitter and an electrical outlet.
3. Connect an HDMI cable to your video device and the HDMI port on the side of the
WirelessHD Transmitter.
4. Turn on the power switch on the back of the transmitter.
5. Turn on your source device and begin playback.
6. Turn on the projector.
7. Press the WirelessHD button on the projector remote control.
Your projector should now display content from your video device. If it doesn’t, see “Solving
WirelessHD Problems” on page 75.
pl3010_3010e_UG.book Page 57 Wednesday, September 7, 2011 6:28 PM