Problem solving, What to do when the lights come on or flash – Epson 3010E User Manual
Page 69
Problem Solving
69
Problem Solving
This section explains how to interpret the projector’s status lights, solve problems with the
picture and remote control, and contact technical support.
What To Do When the Lights Come On
or Flash
The lights on top of the projector indicate the projector’s status and let you know when a
problem occurs.
If the projector isn’t working correctly, first press the P power button, let the projector cool
down, and unplug the power cord. Then plug the power cord back in and turn on the
projector. If this doesn’t solve the problem, check the status lights on top of the projector.
Note: If the
power button and light don’t come on, they may have been turned off using the
Illumination setting (see page 54).
Lights indicating normal operation
Light state
Cause and solution
All lights are off
The projector is turned off. If necessary, connect the power cord.
Power button is on,
power light is off
The projector is in standby mode. Press the
P
power button on
the projector or the
On button on the remote control to turn it on.
pl3010_3010e_UG.book Page 69 Wednesday, September 7, 2011 6:28 PM