Envision Peripherals EN7400e - Manual (Page 8)

EN7400e
8
12OCT04
EN7400e
Before You Operate the Monitor
Install An Optional Wall Mounting Arm (Not supplied)
Follow these steps to finish installing the wall
mounting arm:
1. Place the wall mounting arm onto the back of
the monitor. Line up the holes of the arm with
the holes in the back of the monitor.
2. Insert the 4 screws into the holes and tighten.
3. Insert the power cable into the slot on the back
of the monitor.
The Envisionl EN7400e is compatible with the
Ergotron line of mounting and arm solutions.
Contact Ergotron at 800-888-8458 or visit their
web site at www.ergotron.com for more
information on
the many ways on which you can
mount your Envision LCD monitor.