Escient DVDM-100 User Manual
Page 94
Advertising
PAGE 94
FireBall™ DVDM-100 User
’s Manual
sERiAl coM PoRts
The Serial Control COM Port setting is used to specify which RS-232 serial COM port is to be used
for two-way external control communications with a third party control system.
If there are no available COM ports, you must use the Ethernet based external control for two-way
external control communications with a third party control system.
follow these steps to select which serial port to use for external control:
1. Press the setup key on the remote to display the fireball setup menu.
2. select the External control menu item.
3. select the iR & serial menu
4. select the serial control coM Port menu item.
5. select which serial port to use for external control.
Advertising