Elmo ESD-CC1 - Manual (Page 8)

4. Operations
4.1 Power On
After connecting all necessary cables, turn on the peripheral devices, and then connect DC12V adapter to the keyboard.
The LCD will display the following message:
Later, the keyboard will enter ‘Stand By Mode’.
Stand By Mode:
In the 'Stand By Mode', user can enter ‘System Setting Mode’ by pressing “SYS” key (section 3.4), or enter ‘Camera
Control Mode’ by pressing Camera Select key (section 3.5), or enter ‘Multiplexer Control Mode’ by pressing
Multiplexer Select key (section 3.6), or enter ‘Matrix Control Mode’ by pressing Matrix Select key MX (section 3.7).
4.2 Camera Control Mode
When the keyboard is in Stand By Mode, you can select any active camera by pressing Camera Select key, number key
"1"~"223" and then “ENTER” key or press # + 1(~9) to choose the indexX camera of classX. The ID and device type of
the selected camera will be displayed on LCD. P=Pan, T=Tilt, Z=Zoom, F=Focus, OSD=OSD available.
Now the keyboard is in Camera Control Mode, you can control all of the camera’s functions in this mode.
CCTV Keyboard
2000/10/28 12:00:00
Fig.4.1.2
CCTV Controller
Version x.xx
Fig.4.1.1
Camera Control
Enter Camera No:xxx
Fig.4.2.1.1
Please input index
for Class1 [01]
Fig.4.2.1.2
8