Epson DREAMIO EMP-TW700 - Manual (Page 30)

28
Configuration Menu Functions
"Picture" menu
Seven different settings can be selected for the Color Mode, to match the images being projected or the
projection environment.
p.18
These settings can be adjusted if the output level from the connected equipment is weak and the images
appear dark. The two settings cannot be made simultaneously. You can only select one of them to be
adjusted.
These adjust the dark and light areas of images
• White Level: Adjusts the brightness of bright shades without changing the black level.
When the setting is changed to the - side, bright areas become clearer.
• Black Level: Adjusts the brightness of dark shades without changing the white level.
When the setting is changed to the + side, dark areas become clearer.
Adjusts the overall brightness of the images.
• Brightness: The brightness of the images can be adjusted.
If projecting in dark rooms or onto small screens and the images appear too bright,
decrease the setting.
• Contrast: Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.
This adjusts the colour intensity for the images.
(Adjustment is only possible when composite video and S-Video signals in NTSC format are being
input.)
This adjusts the image tint.
This adjusts the image sharpness.
The adjustment results are applied to the entire image.
This can be used to adjust a specific region. p.23
“Color Adjustment” cannot be selected when the colour mode is set to “sRGB ”.
This adjusts the overall tints of the images. p.20
Displayed for input sources other than computer
Color Mode
*1
Input Adjustment
*2
White Level/Black Level
Brightness/Contrast
Color Saturation
*2
Tint
*2
Sharpness
*2
Standard
Advanced
Color Adjustment
Abs. Color Temp.
*2
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and colour mode setting.