Amprobe AC71B Clamp-On-Multimeter - Manual (Page 7)

44 5
Function Priority
The following diagram indicates the priority of function list:
The LCD display shows
voltage mode when the Input
Terminal is satisfied by the
following conditions:
ACV
.3 V to 999.9 V
< .0 V � + tone
DCV . V to 999.9 V
-0.7 V to -999.9 V
The LCD display shows Ω mode
when the Input Terminal is
satisfied by the following
conditions:
0 to ∞ Ω
ACV
0 V to 0.9 V
DCV -0.4 to -0. V
DCV .0 V to .0 V
The LCD display shows
diode mode when the Input
Terminal is satisfied by the
following conditions:
DCV
0.4 to 0.8 V
The LCD display shows AC
current mode when the
Current Input Jaw is satisfied
by the following conditions:
ACA 0.9 A to 600.0 A
ACV, DCV
whichever is
greater
1st:
3 rd:
ACA Amps
4 th:
2nd: