EchoStar 44 - Manual (Page 9)

10
Note: Receiver models 1000, 2000, 3000, 4000, 5000,
JVC D-VHS, 7100, and 7200 cannot receive satellite
signals connected to the T
O
D
ISH
P
ORT
f . Therefore,
connect LNBFs for the three satellite locations you want
these models to receive on T
O
D
ISH
Ports c through
e . It is recommended that FSS LNBFs be connected to
P
ORT
f since the receivers listed in this note cannot
receive signals from FSS satellites anyway.
3. Connect a cable between T
O
P
OWER
I
NSERTER
1
connection on the switch and the power inserter marked
T
O
S
WITCH
I
NPUT
1.
Do not install any devices between the power
inserter and the switch. The power from the
inserter may damage the device.
The power inserter must be installed in the
cable connected to the switch’s T
O
P
OWER
I
NSERTER
1 or the switch will not work.
The power inserter is for indoor use only.