Emerson Radio CKS1855 - Manual (Page 14)

1 3
Listening To The Radio
Digital Radio Frequency Display
This clock radio features a digital radio frequency display instead of a dial scale to
make tuning easier, especially in a dark room. The LED time display automatically
changes to a radio frequency display as soon as you begin turning the TUNING
control. And the display automatically changes back to the correct time within 10
seconds after you release the TUNING control.
1.) Set the Band AM/FM selector switch to the desired band, AM or FM.
2.) Set the VOLUME control to a low setting.
3.) Press the RADIO ON/OFF button to turn the radio ‘On’. The display changes
from time to an AM or FM radio frequency display.
4.) Turn the TUNING control to the left-
side to select higher numbered
frequencies or to the right-side to
select lower numbered frequencies.
Important: It is not necessary to tune to the exact frequency of your
desired station. Just rotate the TUNING control until you find the
strongest signal and the best reception, even if the frequency number
on the display is higher or lower than the actual station frequency.
W ithin 10 seconds after you release the TUNING control the display
automatically changes back to the correct time.
5.) Adjust the VOLUME control to the desired setting.
6.) When you are finished listening, press the RADIO ON/OFF button to turn
the radio ‘Off’.
(High Low)
CKS1855_053007.p65 30/5/2007, 14:16 13