Amprobe TIME-20 Process-Control-Stopwatch - Manual (Page 9)

4 5
ALARM TIME MODE (SELECT MODE FROM B)
Sequence Hr / Min
• Press and hold A, press C to advance
• Press B to select setting
• Press A to final confirm all settings
DT (DUAL TIME) MODE (SELECT MODE FROM B)
Sequence Hr / Min
• Press and hold A, press C to advance
• Press B to select setting
• Press A to final confirm all settings
TR (COUNTDOWN) MODE (SELECT MODE FROM B)
Sequence Sec / Hr / Min
• Press and hold A, press C to advance
• Press B to select setting
• Press A to final confirm all settings
• Press C to start/stop and repeat counting, or press A
to restart counting, and hold for resetting
CHRONOGRAPH STOP WATCH MODE
(SELECT MODE FROM B)
Sequence For Counting: 1/100 Sec / Sec / Min
• Press C to start/stop, or press A to split, up to 5 laps
• (In split function, press C to start, then press A for
1st, 2nd and 3rd, 4th laps, and the last 5th lap must
press C to stop for recording, or it will delete the 1st
lap to record the latest 5 laps)
• Press and hold A to clear or reset
• Press B back to normal time mode