Amprobe TMD-10 Dual-Temperature-Meter - Manual (Page 6)

5
SyMboLS
�
Refer to the manual
�
Complies with EU
directives
�
Conforms to relevant
Australian standards.
�
Do not dispose of this
product as unsorted
municipal waste.
� Warning and Precautions
The bead thermocouples supplied with the meter are not intended for •
contact with liquids or electrical circuits.
Do not mix thermocouple types.
•
Match the polarity of the adapter to the polarity of the thermocouple •
inputs.
UNPACkINg AND INSPECTIoN
Your shipping carton should include:
1 TMD-10 temperature meter
2 K-type thermocouples
1 9 volt battery
1 Manual
If any of the items are damaged or missing, return the complete package to
the place of purchase for an exchange.
INTRoDUCTIoN
The TMD-10 is a dual input temperature measurement meter using Type K or
Type J thermocouples.
oPERATIoN
Press the 1. � button to turn power on or off
Set the Function Switch to °C or °F. 2.
Select thermocouple type (K / J) and connect the thermocouple(s) to the 3.
T1 or T2 input.
� Do not mix thermocouple types.
� Match the polarity of the adapter to the polarity of the thermocouple
input.
Expose the thermocouple(s) to the temperature(s) to be measured. 4.
Read the LCD display. 5.