Amprobe TMD-55 Multilogger-Thermometers - Manual (Page 26)

19
Wire
Communication
Protocol 19200 baud rate. (TMD-56)
Wireless Features
Frequency range 910~920MHz (TMD-55W)
Low current consumption less than 1mA.
The transmitting distance can reach 25M without
magnetic interference.
�
- EMC: Conforms to EN61326-1.
This product complies with requirements of the
following European Community Directives: 89/ 336/
EEC (Electromagnetic Compatibility) and 73/ 23/ EEC
(Low Voltage) as amended by 93/ 68/ EEC (CE Marking).
However, electrical noise or intense electromagnetic
fields in the vicinity of the equipment may disturb the
measurement circuit. Measuring instruments will also
respond to unwanted signals that may be present within
the measurement circuit. Users should exercise care and
take appropriate precautions to avoid misleading results
when making measurements in the presence of electronic
interference.
MAINTENANCE AND REPAIR
� WARNING
To avoid possible electrical shock, disconnect the
thermocouple connectors from the thermometer
before removing the cover.
Installing and Replacing Battery
A. Screw
B. Battery Cover
C. Battery