Warning – Amprobe PRM-2 Phase-Sequence User Manual
Page 11
Advertising
11
PRM-3 PHASE SEQUENCE & MOTOR ROTATION TESTER
5.1 During Use (PRM-3)
WARNING
When the tester is connected to the measured circuits, never touch the tips of the un-
used test leads.
WARNING
Connecting the tester to the voltage exceeding 600V can damage the tester or cause
danger for the user.
PHASE SEQUENCE TEST
•
Connect the tester to the examined installation with the use of the test leads.
•
Turn on the tester with the ON/OFF key.
Advertising
This manual is related to the following products: