Amprobe BT-120 Breaker-Tracer - Manual (Page 6)

2
SYMBOLS
 Battery 
Caution ! Refer to the
Manual
 Double Insulated  Dangerous Voltage
 Alternating Current

Earth Ground

Direct Current

Fuse

Application around and
removal from hazardous
live conductors is permitted
�
Complies with European
Directives

Do not dispose of this
product as unsorted
municipal waste. Contact
a qualified recycler for
disposal.
�
Conforms to relevant
Australian standards

Underwriters Laboratories.
[Note: Canadian and US.]

Audible tone
Safety Information
• The BT-120 Breakers Tester is conformed to EN61010-1:2001; CAT II 120 V,
class II and pollution degree 1 or 2.
• Do not exceed the maximum overload limits (see specifications) nor the
limits marked on the instrument itself. Never apply more than 120 V ac
rms between the adapter prongs of the transmitter.
 Warning and precaution
• Before and after hazardous voltage measurements, test the voltage
function on a known source such as line voltage to determine proper
meter functioning.• Do not touch the membrance.
• Inspect the BT-120 receiver and the BT-120 transmitter before every use.
Do not use any damaged part.
• Never ground yourself when taking measurements. Do not touch
exposed circuit elements or test probe tips.