Technical support – Avago Technologies MegaRAID SAS 9240-4i User Manual
Page 4
43013-00 Rev. B, June 2010
Find a list of LSI Corporation’s U.S. distributors, international distributors, sales
offices, and design resource centers on the LSI web site at:
LSI, the LSI logo design, and MyStorage are trademarks or registered trademarks
of LSI Corporation. All other brand and product names may be trademarks of their
respective companies.
Copyright © 2009-2010 by LSI Corporation. All rights reserved.
LSI Corporation reserves the right to make changes to any products and services
herein at any time without notice. LSI does not assume any responsibility or liability
arising out of the application or use of any product or service described herein,
except as expressly agreed to in writing by LSI; nor does the purchase, lease, or
use of a product or service from LSI convey a license under any patent rights,
copyrights, trademark rights, or any other of the intellectual property rights of LSI
or of third parties.
of each drive stores parity information that reconstructs
data if a drive fails. RAID 5 provides good data throughput
for applications with high read request rates.
• RAID 10 (RAID 1 and RAID 0 in spanned groups):
RAID 10 uses mirrored pairs of drives to provide complete
data redundancy. RAID 10 provides high data throughput
rates.
Note:
Refer to the MegaRAID SAS Software User’s
Guide on the MegaRAID Universal Software
Suite CD for more information about RAID levels.
T E C H N I C A L S U P P O R T
For assistance in installing, configuring, or running the SAS
9240-4i RAID controller or the SAS 9240-8i RAID controller,
contact an LSI Technical Support representative.
Click the following link to access the LSI Technical Support
page for storage and board support:
From this page, you can send an email or call Technical
Support, or submit a new service request and view its status.
E-mail:
Phone Support:
1-800-633-4545 (North America)
00-800-5745-6442 (International
Note:
The international toll-free number does not
require country-specific access codes.