2 sas-2 interface, 4 operating system support, 5 lsi sas 9207-4i4e hba characteristics – Avago Technologies SAS 9207-4i4e Host Bus Adapter User Manual

Page 5: 1 flash, 2 led, 3 connectors, 1 flash 5.2 led 5.3 connectors, 4operating system support

Advertising
background image

Avago Technologies

- 5 -

LSI SAS 9207-4i4e PCI Express to 6Gb/s SAS HBA User Guide
October 2014

Operating System Support

3.2

SAS-2 Interface

The LSI SAS 2308 controller chip contains the SATA + SAS functionality for the LSI SAS 9207-4i4e HBA. The following

table shows the LSI SAS 9207-4i4e HBA 6Gb/s SAS performance.

4

Operating System Support

The LSI SAS 9207-4i4e HBA supports all major operating systems: Windows®, Linux® Red Hat®, Linux SUSE® Enterprise

Server (SLES), Solaris™, VMware®, and FreeBSD®. Refer to

http://go.lsi.com/hbas

for details on the software versions

and device driver support.

NOTE

The LSI SAS 9207-4i4e HBA supports Oracle® Solaris 10, which provides

a built-in driver, so installation of an LSI driver is not required. For more
information on the Oracle Solaris 10 driver and installation, sign in at
the following Oracle link.

https://support.oracle.com/

Contact Oracle support for Oracle driver or software support.

5

LSI SAS 9207-4i4e HBA Characteristics

5.1

Flash

The LSI SAS 9207-4i4e HBA has onboard Flash ROM for the firmware and BIOS. The LSI SAS 9207-4i4e HBA provides

one 4 M x 16-bit Flash ROM for storing the firmware and BIOS.

5.2

LED

The LSI SAS 9207-4i4e HBA Heartbeat LED blinks green to indicate that the HBA is capable of general activity.

5.3

Connectors

This section describes the different connectors on the LSI SAS 9207-4i4e HBA.

PCIe Connector (EC1). The LSI SAS 9207-4i4e HBA supports a x8 interface. The PCIe host interface connection

is

through the edge connector (EC1), which provides connections on both the top (EC1B) and bottom (EC1A) of the
board. The signal definitions and pin numbers conform to the PCIe specification.

SAS Connectors (J6 and J7). The LSI SAS 9207-4i4e HBA supports SAS connections through connector J6, which is
an SFF-8088 mini-SAS external connector, and connector J7 which is an SFF-8087 mini-SAS internal connector. The
HBA supports SAS sideband signal assignments.

Table

1 6Gb/s SAS Bandwidths

Half Duplex

Full Duplex

Narrow port (one lane), 600MB/s

Narrow port (one lane), 1200MB/s

Wide port (four lanes), 2400MB/s

Wide port (four lanes), 4800MB/s

Advertising