Avago Technologies 3ware 9650SE-12ML (Channel) - Manual (Page 15)

Controlling Command Logging in 3DM 2
www.3ware.com 11
Controlling Command Logging in 3DM 2
Command logging provides the ability to log each command that makes a
change to the controller configuration in a log file (tw_mgmt.log). This can be
useful for trouble-shooting.
When you install 3DM 2, you are asked whether or not to enable command
logging for 3DM 2.
In 9.5.2, you can now enable or disable 3DM 2 command logging through a
setting on the
3DM 2 Settings page.
To enable or disable 3DM 2 command logging
1. Click 3DM 2 Settings on the 3DM 2 menu bar.
2 In the Server Configuration section of the 3DM 2 Settings page, select
either Enabled or Disabled in the Command Logging field.
Figure 8. Command Logging setting on 3DM 2 Settings page