Avago Technologies MegaRAID SCSI 320-0X (530) User Manual
Page 21
Detailed Installation
2-3
Copyright © 2005 by LSI Logic Corporation. All rights reserved.
version of this User’s Guide, and other related
documentation.
◊
A license agreement
Step 2.
Power Down the System
Turn off the computer and remove the AC power cord. Remove
the system’s cover. See the system documentation for
instructions.
Step 3.
Check the Jumpers
Ensure that the jumper settings on your storage adapter are
correct. See
Chapter 3, “MegaRAID 320-0X Storage Adapter
for diagrams of the storage adapters with their
jumpers and connectors.
Step 4.
Install the MegaRAID 320-0X Storage Adapter
Select the special ZCR 3.3 V, 64-bit PCI-X expansion slot, and
align the storage adapter PCI-X bus connector to the slot.
Press down gently but firmly until the card is properly seated in
the slot, as shown in
, then screw the bracket into the
computer chassis.