Avago Technologies LSI SAS 9205-8e - Manual (Page 10)

LSISAS9205-8e PCI Express to 6Gb/s SAS HBA User Guide May 2011
LSI Corporation
- 8 -
UART Connector (J4) The UART connector debug port requires a special cable and LSI support to gather detailed IOC
status.
6.5 Physical Characteristics
The LSISAS9205-8e HBA is a 6.6-in. x 2.713-in., low-profile board. The component height on the top and bottom of the
LSISAS9205-8e HBA follows the PCIe specification. The following figure shows the board connectors.
Figure 2 LSISAS9205-8e Board Layout
 EC1: PCIe x8-lane board edge connector
 J1: ICE JTAG debug connection
 J4: UART connection
 J5, J6: SFF-8088 mini-SAS, external, right-angle connectors
4 R_ICE_TRST_L 12 NC
5 NC 13 NC
6 1.8 V 14 NC
7 ICE_TCK 15 NC
8 NC 16 Gnd
Table 5 LSISAS9205-8e UART Pinout
Pin Function
1 UART_TX
2 Gnd
3 UART_RX
4 +1.8 V
Table 4 LSISAS9205-8e ICE JTAG Header Pinout
Pin Function Pin Function
LSISAS2308
J5
J4
J6
EC1
J1
Controller