Epson 503c - Manual (Page 50)

44 Fine-tuning the Projector
5. Use the Enter button to make your selections.
6. When you’re finished customizing the highlighting tools, press
Esc or Menu . Your selection(s) are saved.
Creating Your Own Startup Screen
You can transfer any image on your computer to the projector, and
then use it as the screen displayed when the projector is not receiving a
signal. You can also set it to be displayed when you press the
A/V Mute button, or as a startup screen. The image can be a company
logo, slogan, photograph, or any other image you want to use.
Capturing the Image
Start by displaying the image you want to use on the projector. You
can use an image from either a computer or video source such as a
VCR or digital camera. Then follow these steps to capture the image
and transfer it to the projector:
1. Press the Menu button on the remote control. You see the main
menu.
2. Use the Enter button to highlight the User’s Logo menu.
3. Press Enter to select it. You see the message shown at the left.
4. Select Yes and press Enter . A selection box displays over the
image.