Epson 503c - Manual (Page 36)

30 Using the Remote Control
Controlling the Picture and Sound
You can use the remote control to select your source, adjust the
volume, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, or display a picture-in-picture video image.
Make sure you have set up your projector and connected any
equipment as described in Chapter 1 or Appendix A.
Switching Between Picture Sources
If you’ve connected your projector to a computer and a video source,
you can use the buttons on the remote control to switch between the
different sources.
■ Press the Comp button to select your computer source.
■ Press the Video button to select a standard composite video
source.
■ Press the S-Video button to select an S-video source.
After you select a source, the screen goes dark for a moment before the
image appears.
Adjusting the Volume
If you’ve connected an audio source to the projector, you can adjust
the sound that’s output through the projector’s speakers.
■ To increase the volume, press on the right ( + ) side of the Volume
button.
■ To reduce the volume, press on the left ( – ) side of the Volume
button.
Power
Freeze
A/V Mute
E-Zoom
R/C ON
OFF
3
1
5
2 4
Enter
Esc
Menu
Comp
S-Video
Auto
P in P
Resize
Video
Help
- Volume +
select video
source
select
computer
source
adjust
volume
select S-video
source