Mpman MINI300BT - Manual (Page 14)

RADIO OPERATION
Basic information for FM operation
1. Make sure the aerial on the back of the unit is fully extended and adjusted
before attempt to tune to an FM station (a vertical position is recommended).
This will ensure the unit to get the best reception.
2. Extending the aerial also ensures the best possible sound quality.
3. The range of FM frequency is from 87.5MHz to 108.0MHz.
4. Press FM button on remote control or FUNCTION button to enter FM mode.
5. Press MO/ST button to turn STEREO ON or OFF if there is strong stereo signal.
Selecting stations
1. Press NUMBER buttons to select stations.
E.g. press 1, then 5 to select 15th station.
2. Press CH+/- buttons to turn to skip to the previous or next station.
3. Press T/F button on remote control to choose frequency.
E.g. first press T/F button, then press 9, 9, 7, 0 to select the frequency 99.7MHz.
Station searching/tuning
1. Automatic searching
Press the SEARCH button, the unit starts to search stations from low to high
frequency automatically. The searched stations are saved automatically. Press
again to stop.
2. Manual tuning:
a. Press TU+/- button briefly to adjust the frequency in increment of 0.05MHz.
b. Press and hold TU+/- buttons to tune the next or previous frequency with
sufficient reception, once an available frequency is found, it will stop tuning.
Save Stations (Up to 60 stations can be saved.)
1. To save the current frequency to the current preset:
E.g. If you are listening to the 88.9MHz in the 5th station, press SAVE button on
remote control directly and the 88.9MHz is saved to the 5th station.
2. To save a station into preset:
E.g. If you want to save 99.70MHz to the 15th station, first press CH+/- buttons
or press Number buttons 1, 5 to select the 15th station; press T/F button to
enter frequency interface, input the number 9, 9, 7, 0; at last press SAVE
button to save the station.
13