Wiring diagram, Specifications, Radio sensitivity – Mpman CR50 User Manual

Page 3

Advertising
background image

Wiring diagram:

1.This unit is applicable to 12V direct-current
negative ground electrical system only.
2.In order to avoid short circuit, please disconnect
the wire connecting terminal of the car storage battery
before all applicatons of the unit are completed.
3.Please note that the yellow directing wire is connected
to the anode terminal(+) or the BAT terminal.
4.Change the fuse, the specifications of the fuse for
both the automobile and the unit shall be the same.
5.Excellent 4-8 ohm speaker is required for perfect
performance.

SPECIFICATIONS:

Frequency range:.....................87.5-108MHz
Medium frequency:..................10.7MHz

0.3%

±

Signal/Noise ratio:......................50dB

USB/SD:
Frequency response:......................20Hz-20KHz
Signal/Noise ratio:...................... >50dB
T.H.D............................................<0.5%(1KHz)

Others:
MAX Output Power......................4x45W
Supply voltage.....................12-15VDC minus earth
Speaker impedence......................4-8 ohm /ch
Demensions................................177x115x50mm

FM tuner:

Radio sensitivity

: .......................10dB

Blue Black

/

+

+

+

-

-

-

-

+

Antena terminal

White(L)

Red R

( )

Audio output

ACC (12V,red)

Grey/black

White/black

Green/black

Auto antenna light (blue)

Rear right speaker

Front right speaker

Front left speaker

Rear left speaker

Blue

White

Grey

Green

Ground (black)

Power wire (12V,yellow)

Advertising