Mpman PDV2000 - Manual (Page 28)

TROUBLESHOOTING
Ensure that the TV and amplifier have been turned on and properly set up. •
Ensure that the TV and amplifier connections are secure and correct. •
Try a different Audio track of the DVD by pressing AUDIO. •
Ensure that the MUTE function of the TV, Amplifier, or Player is not engaged. •
The remote control doesn’t work.
Ensure that the Power Switch has been physically set to the ON position. •
Ensure that there are no obstacles between the remote and the player. •
Point the remote at the remote sensor on the main unit. •
Ensure that the batteries in the remote retain a charge and have been installed correctly. •
Try replacing the remote’s batteries. •
The player has malfunctioned.
Unplug the player. After 30 minutes, plug in and power on the player -- the restore function should reset •
the player.
Monitor troubleshooting
There is no power to the device.
Ensure that the Power Switch on the monitor is physically set to the ON position. •
Ensure that the AC adaptor cord is securely connected to the player and the proper wall outlet. •
There is no sound or distorted sound.
Ensure that the AV cable connections are secure and correct. •
Ensure that the MUTE function of the monitor is not engaged. •
The picture is noisy or distorted.
Reset the monitor’s color system. •
Ensure that the AV cable connections are secure and correct. •
This is to certify that the portable DVD palyer is conformity with
council directive 2004 / 108 / EC(EMC Directive)
Applicable standards
EN55013:2001+A1+A2
EN61000-3-2:2006
EN61000-3-2:2008
EN55020:2007
For more information please visit our website
www.mpmaneurope.com