EVGA 170-BL-E762 - Manual (Page 48)

EVGA X58 SLI CLASSIFIED Motherboard
50
Press Enter to auto-detect SATA channels in the system. Once the channel is
detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and
Sector are automatically filled in.
 None
There are no HDD installed.
 Auto
The system can auto-detect the hard disk when booting up.
 Manual
When you set the channel to
[Manual]
and change
Access Mode
to
[CHS]
,
you can then enter the number of cylinders, heads, Precomp, landing zone,
and sector. You can manually enter the values or you can press Enter to
display a window that tells you the min and max values.
The BIOS supports the following HDD
Access Modes:
 CHS
For HDD less than 528 MB.
 LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
 Large
For HDD greater than 528 MB but not supporting LBA.
 Auto
Recommended mode.
IDE HDD Auto-Detect [Press Enter]
IDE Channel 0 Slave
[Manual}
Access Mode [CHS]
Capacity 0 MB
Cylinder
..... 0
Head [ 0]
Precomp [ 0]
Landing Zone [ 0]
Sector [ 0]
Cylinder
Min= 0
Max=65535
Key in a DEC number :
:Move ENTER:Accept ESC:Abort
Press ENTER to display sub-menu
or enter number manually