PLANET IPX-1500 - Manual (Page 22)

22
Internet Access Setup
• When WAN interface of IPX-1500 is properly configured, with default Windows TCP/IP settings, no
changes need to be made on LAN side PC for Internet access.
• If using a specified (fixed) IP address on your PC, refer to the user manual for details of the required
changes:
• The Gateway must be set to the IP address of IPX-1500
• The DNS should be set to the address provided by your ISP.
For Windows 9x/ME/2000
Select Start Menu - Settings - Control Panel - Internet Options.
Select the Connection tab, and clicking the Setup button.
Select "I want to set up my Internet connection manually, or I want to connect through a local
area network (LAN)" and clicking Next.
Select "I connect through a local area network (LAN)" and clicking Next.
Ensure all of the boxes on the following Local area network Internet Configuration screen are
unchecked.
Check the "No" option when prompted "Do you want to set up an Internet mail account now?”
Clicking Finish to close the Internet Connection Wizard.
Setup is now completed.
For Windows XP
Select Start Menu - Control Panel - Network and Internet Connections.
Select Set up or change your Internet Connection.
Select the Connection tab, and clicking the Setup button.
Cancel the pop-up "Location Information" screen.
Clicking Next on the "New Connection Wizard" screen.
Select "Connect to the Internet" and clicking Next.
Select "Set up my connection manually" and clicking Next.
Check "Connect using a broadband connection that is always on" and clicking Next.
Clicking Finish to close the New Connection Wizard. Setup is now completed.
L Hint
To verify the Internet connection, you may start ping
command from command prompt to get response from an Internet
node/site.