Trunk management – gateway trunk, Trunk management – trunk group – PLANET IPX-300 User Manual
Page 21
Figure 3-8. Add new service providers
Step 2. Fill in the required information in Service Provider Advance Setup page.
Figure 3-9. Service provider advance setup
Caller id
The caller ID will be sent between the callee and caller and will
be displayed on SIP device LCD panel for identification.
User name
User name for authentication
Password
User password for authentication
Registrar Server Address
Assigns the SIP Register Server’s IP address / Domain name
Registrar Server Port
Port number of SIP Register Server. Assigns a value from 1024
to 65535, the common default SIP port is 5060.
Outbound Proxy Address
Outbound Proxy server’s IP address / Domain name. Assign a
server’s IP / Domain name which is in charge of call-out
service.
Outbound Proxy Port
Port number of Outbound Proxy Server. Assign a number from
1024 to 65535, the common default SIP port setting is 5060.
On duty / Off duty voice When the service provider registered to PBX, incoming calls
21