PLANET VIP-350PT - Manual (Page 94)

[94/168]
[Back] Return without any changes.
【 OK】 Save changes and return.
【 ↑】and【↓】 Move cursor per line if there are too many lines to fit into one screen.
U P n P :
Back
SNMP
The IP Phone supports Simple Network Management Protocol (SNMP) v2 and Management
Information Base (MIB) v2 for SNMP Get/Set/Trap operation. It supports the following (RFC1213)
• “system” group : “sysObjectID” represents its model.
• “interface” group : Only Ethernet ports are included in the table. “ifAdminStatus” is effective. For
LAN port, “ifIndex is 1, and 255 for Ethernet WAN port.
• “IP” group
• “ICMP” group
• “TCP” group
• “UDP” group
• “SNMP” group.
Besides, it supports proprietary enterprise IAD MIB to Get /Set current configuration by SNMP as well,
including:
• Hardware type & version, software version
• MAC address of WAN/LAN
• Number of port (phone/Ethernet), Call-Channel 【A / B】status
• Real-time parameters, including gateway, DNS, SNMP, RTP, CODEC, etc.
• SIP settings, Registrar server, and Proxy server.
• Image upgrade and restart.
[Back] Return without any changes.
【 OK】 Edit selected item.
【 ↑】and【↓】 Navigate through menu items.