PLANET ADE-3400 - Manual (Page 52)

The following table describes the parameter and button of this page:
Field Description
Host Enter the valid IP address or domain name.
Run Ping Click it to start to Ping.
3.8.2 ATM Loopback
Choose Diagnostic > ATM Loopback. The page shown in the following figure appears.
In this p age, you can use VCC loopback functi on to check the connectivity of the VCC.
The ATM loopback test is useful for troubleshooting problems with the DSLAM and A TM
network.
Click Run Lookback to start testing.
3.8.3 ADSL
Choose Diagnostic > ADSL. The page shown in the followin g figure appears. It is used
for ADSL tone diagnostics.
52