PLANET WSG-404 User Manual
Page 75
Wireless Subscriber Gateway
75
Click the hyperlink for further configuration. Enter the related information for the primary server
and/or the secondary server (the secondary server is not required). The blanks with red star are
necessary information. These settings will become effective immediately after clicking the
Apply
button.
Server IP:
Enter the IP address or domain name of the LDAP server.
Port:
Enter the Port of the LDAP server, and the default value is 389.
Base DN:
Enter the distinguished name of the LDAP server.
Account Attribute:
Enter the account attribute of the LDAP server.
3.2.1.5 Authentication Method - NTDomain
Choose
“NTDomain”
in the
Authentication Method
field, the hyperlink beside the pull-down menu
will become
“NTDomain Setting”
.