2 hardware installation – PLANET ENW-9803 User Manual
Page 9
User Manual of ENW-9801 / ENW-9803
Figure 4: Low Profile Bracket of ENW-9803
LED
Color
Description
Orange
Indicates the link is established at 10Gbps full duplex mode.
Green
Indicates the link is established at 1000Mbps full duplex mode.
Link Speed
OFF
Indicates the link is established at 100Mbps full duplex mode.
Active
Green
Blink: indicates data transmit and receive through the port.
Table 2: Descriptions of the ENW-9803 LED
2.2 Hardware Installation
Step 1: Please turn off your PC.
Step 2: Remove any metal decorations from your hands and wrists.
Step 3: Remove the cover from your PC.
Step 4: Locate an empty PCI Express slot and remove the corresponding back plate. Save the screw for
use in Step 6.
Step 5: Carefully insert the 10 Gigabit Ethernet adapter into the chosen slot and press firmly with proper
push to ensure it is fully seated in the slot.
- 9 -