Elo TouchSystems 2125C Series - Manual (Page 24)

4-18 E l o E n t u i t i v e T o u c h m o n i t o r U s e r G u i d e
Monitor Warning Messages
Picture not present or severely
distorted. Verify that your video display adapter settings are
formatted for the correct resolution and vertical
refresh rates.
Duplicated images A problem with your graphics adapter or
touchmonitor. Contact your service representative.
Touch doesn’t work. Check to make sure the touchscreen cable is
securely attached at both ends.
Message Suggestion
Error message: OUT OF RANGE The graphics adapter is set for a refresh rate or a
line frequency that is too high. Select another
display mode with lower frequencies as directed
by your video card vendor.
Self diagnostics message: NO SIGNAL This message indicates that the signal is missing or
faulty. Check that the signal cable connector is
properly connected and that the connection pins
are not bent or damaged. If the connector is loose,
tighten the connector screws. Check that the PC is
powered on.
Problem Suggestion (s)